Replace your Old or Broken Remote Key Fob for Less An inexpensive replacement for your original remote key fob, this Keyless2Go car key replacement is compatible with a wide range of vehicles from Chrysler, Dodge and Jeep vehicles. Each fob key has been pre-tested to ensure functionality and that signals are transmitting properly. The keyless remote key is self-programable if you already have 2 working original keys that start the engine. The key blade will need to be cut by a qualified locksmith or dealer. Every remote key fob comes complete with batteries and free tech support to help troubleshoot. To ensure this replacement key fob will work with your vehicle, your existing remote key must be FCC ID: OHT692427AA, OHT692713AA. Compatibility: Chrysler 200 2011 - 2012 Chrysler 300 2005 - 2007 Chrysler Aspen 2007 - 2009 Chrysler Pt Cruiser 2006 - 2010 Chrysler Sebring 2008 - 2010 Dodge Avenger 2008 - 2011 Dodge Caliber 2007 - 2012 Dodge Charger 2006 - 2007 Dodge Magnum 2005 - 2007 Dodge Nitro 2007 - 2011 Dodge Ram 2006 - 2008 Jeep Commander 2006 - 2007 Jeep Compass 2007 - 2016 Jeep Grand Cherokee 2005 - 2007 Jeep Patriot 2007 - 2016 Jeep Wrangler 2006 - 2016 How to Program your Keyless2Go Key Fob Replacement: 1. Insert first original working key into the ignition and turn ignition switch to ON. Wait for approximately 3 seconds then turnignition to OFF and remove key. 2. Within 15 seconds of removing first key insert second original working key into ignition and turn ignition switch to ON. Wait approximately 10 seconds. You will see the immobilizer warning lamp illuminate on the dash and you will hear an audible tone.Turn ignition OFF and remove the key. 3. Within 50 seconds insert the new unprogrammed key into ignition. Turn ignition switch to ON. After approximately 10 seconds you should hear an audible tone and the immobilizer lamp will remain illuminated for 3 seconds. Once this occurs programming iscompleted. 4. For each additional key you must repeat these steps starting with step number 1.
