Free shipping on all orders over $50
7-15 days international
22 people viewing this product right now!
30-day free returns
Secure checkout
16233606
Touchless Bathroom Fauceet Touchless Bathroom Faucet Gangang Lead Free Automatic Sensor Faucet Cold and Hot Single Handle Bathroom Electrical Basin Robinet Faucet Material:304 stainless steelSurface Treatment:PolishingSurface Finishing:brush nickleNumber of Handles:TouchlessCore Valve:Solenoid ValveFaucet Mount:Single HoleInstallation Type:Deck MountedType:Basin FaucetWater Type:Cold&hot Water Automatic Faucet Parameters Power Supply:DC 6V,4AA alkaline Battery(not included),can last for 2 years for family useSensoring Distance(factory setting):15cmDeck Hole Diameter:20-30mmDeck Thickness:20-45mmDeck Plate Length:6.3inchFlow Rate:8L/MinCartridge Lifecycle:500,000 TimesWater Pressure:0.05-0.7MpaSwitching Time:less than 0.7sLow Battery Indicator:Red Led Flash Motion Sensor Faucet Infrared Sensor Faucet Factory setting sensing distance is 15cm. Put your hand within this distance, water will flow automatically. Remove your hand, water will stop. This motion sensor faucet will make your washing cleaning and convenient. Water Saving Faucet Gangang faucet aerator with soft water flow,no splash,water saving. Maximum lime resistanceNo need to disassemble the aerator for cleaningPerfect stream qualityVery low noise levelNo Damage Brass Touchless Faucet Faucet is made of 304 stainless steel,never rust and anti-fingerprint. It comes with a deck plate. Plate length is 6.3 inch. It is suitable for single hole basin. If your are using an 8 inch 3 hole basin. You have to prepare another deck plate in advance. Bathroom Basin Mixer It's a single hole basin faucet. Faucet stem length is 70mm. The suitable deck thickness is 20-45mm. The stem diameter is 20mm. Suitble deck hole is 20mm-30mm. The faucet is standard size and suitable for most families. Automatic Faucet Package Content Gangang faucet is packed with thick foam and color box. You will receive it in good condition with all faucets accessories included: 1x faucet body with deck plate (cover deck holes)1x control box1x water mixer valve,brass with check valve2x 1/2-9/16 water supply pipe, with red and blue mark(red one for cold water, blue one for cold water)1x 1/2-1/2 water pipe (for mixing water)4x mounting screws (fix control box on the wall)1x instruction paper How to install Gangang Automatic Faucet Gangang Touchless Faucet Installation Steps Before Installation, you may need these tools: electrodrill,screwdriver,hammer,spanner,pencil. Install the faucet according to the following steps: Step 1: Mounting the faucet on the deck and fasten the nuts on under the deck.Step 2: Put 4 AA alkaline battery in the battery case (batteries are not included in the package).Step 3: Fixing the control box on the wall.Step 4: Connect water mixing vale to the control box (mixer valve outlet to control box inlet).Step 5: Connect the water hoses (cold water hose marked blue, hot water hose marked red, mixing water hose without color).Step 6: Connect the sensor signal wire
【Premium Material and Sophisticated Design】made of stainless steel and brass, brushed nickel finish is very scratch-resistant and won't discolor, adding a modern fashion and elegant look to the non-contact faucet, the hose and mixing valve with a check valve in it can effectively prevent the water from flowing back in the house, school and other commercial places, widely used in houses, schools and other commercial places.
【Convenient and hygienic】 You can use touchless motion sensor bathroom faucets under water pressure 0.05-0.7 MPa. You don't have to touch the faucet before or after you wash your hands, so you avoid having to wash your hands again with the faucet, improving user hygiene standards and ease of use.
【Sensitive and Save Water】Our single hole bathroom faucet has a sensing distance of 5 inches, even if your hands have soap within the sensing range, it can supply water at a flow rate of 2 GPM and shut off within 1.5 seconds of removal, saving a lot of water
【Adjustable Water Temperature】The water temperature can be adjusted under the sink through the mixing valve of the faucet. Adjust the water temperature to your preferences to ensure a comfortable and personalized washing experience
【Easy to Install】Includes all necessary installation parts (battery not included), even if you are not a plumber or handyman of any skill level for this sensor faucet, installation is a breeze with the help of the installation manual!
The faucet arrived today and I installed it today. Very impressive quality as I was replacing an older different brand sensor faucet that I had for about 7 yearsIt was easy to install and had almost everything needed. I used teflon tape on my connections, so that was the only thing I didn't find provided. Also if you have pump pliers and stubby wrench helped in the installation. Definitely you need a flashlight too. Since I had to install it while on my back to screw tight the fixture from under my vanity, I used bubble wrap layers to lay on. Also have some blue painters tape too, it comes in handy to temporary hold down the fixture when tightening and then when done it doesn't tarnish the fixture finish when you remove it.Another suggestion for installing, in my opinion and experience, have all your cold and hot hoses and mixer valve installed on the solenoid unit first. Also have the batteries installed too. Then when you install the faucet fixture to your vanity and have that hose connection done on it. Then connect the other end to the solenoid unit. Then you finally screw the solenoid unit to the back of the vanity cabinet last. This is so you can check for leaks when you turn back on the water to see and do any necessary final tightening on the hose ends if needed.I did however because of where my supply hot and cold water supply was, I needed to use longer water hoses than what was provided. The ones provided in the box are about 15 inches long, so it didn't give me enough play for me to mount the solenoid valve unit to the back of the vanity once I had all the hoses connected just to see how it all fits and if you can locate the solenoid unit with minimum kinking of the hoses.I also liked that it had a hot/cold mixer valve too, which is great. I like that and didn't have to make an additional purchase.Now, from my experience, the only two things that would fail on sensor fixtures like these are 1) the solenoid valves, especially the O rings that are in there, usually they shrink or harden, and then start leaking from there. And 2) the mixer valve, where the gasket will fail in that too.But overall very good quality parts, looks and works great.